ibrahim_mohamed

Dr. Ibrahim Mohamed Abdelhalim Mohamed

Lecturer - Lecturer at Chemistry Department, Faculty of Science

Faculty of science

Address: 25 Sohag University

4

Like

Ibrahim M A Mohamed currently works as a lecturer at department of chemistry, faculty of science, Sohag university. Current research interest concentrates in materials chemistry, Energy and environmental applications . Dr Ibrahim has MSc from Sohag university (Physical Chemistry; Chemical Kinetics, 2013) and PhD from Chonbuk national university (Materials Chemistry; Solar Energy, 2017, South Korea). 


2020-02-20 03:31:51 | Keywords Electrocatalysis, Ferrites,
A facile chemical synthesis of CuxNi(1−x)Fe2O4 nanoparticles as a nonprecious ferrite material for electrocatalytic oxidation of acetaldehyde
In the present work, Cu-doped nickel ferrite (CuxNi(1−x)Fe2O4) nanoparticles (CuNFNPs) were chemically fabricated by adding citric acid as a capping agent followed by combustion and calcination for acetaldehyde oxidation reaction (AOR) in KOH electrolytes. The as-prepared CuNFNPs were studied in terms of Fourier-transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM), Field emission scanning electron microscope (FE-SEM), Energy-dispersive X-ray spectroscopy (EDX), ... Read more

2018-09-27 04:47:20 | Keywords Capacitive deionization,
Incorporating zirconia nanoparticles into activated carbon as electrode material for capacitive deionization
In recent years, capacitive deionization (CDI) has attracted intensive research due to its environmentally-friendly nature and low power requirement. Although the characteristics of titania (TiO2) and zirconia (ZrO2) are almost the same, ZrO2 has not attracted the same attention since the characteristics of the carbonaceous material need to be modified to enhance its performance as an electrode in CDI cells. ... Read more

2018-10-18 08:45:21 | Keywords Electrode Material,
Design of novel electrode for capacitive deionization using electrospun composite titania/zirconia nanofibers doped-activated carbon
Well-dispersed TiO2/ZrO2 nanofibers-doped activated carbon (AC/TiZr) were successfully synthesized as an electrode for the capacitive deionization (CDI) technique via electrospinning that was followed by a hydrothermal treatment. SEM, TEM, XRD, XPS and EDX measurements were employed to characterize the morphology, crystal structure and chemistry composition of the as-synthesized material. The electrochemical performance of the AC/TiZr nanocomposite modified electrode was measured ... Read more

2018-10-07 08:35:00 | Keywords CDI,
Electrocatalytic behavior of a nanocomposite of Ni/Pd supported by carbonized PVA nanofibers towards formic acid, ethanol and urea oxidation: A physicochemical and electro-analysis study
A nanocomposite of Ni/Pd supported by carbonized poly-vinyl alcohol (PVA) nanofibers (NFs) was synthesized via electrospinning followed by calcination under an argon atmosphere. The as-synthesized NFs were studied using physicochemical analyses, such as field-emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS), to investigate the morphology, crystallinity, ... Read more

A Multifunctional Zinc Oxide/Poly(Lactic Acid) Nanocomposite Layer Coated on Magnesium Alloys for Controlled Degradation and Antibacterial Function
ABSTRACT: In the present work, magnesium (Mg) AZ31 alloy was coated with a multifunctional membrane layer composed of ZnO nanoparticles (NPs) embedded in a poly(lactic acid) (PLA) matrix. We aimed to produce a stable coating that would be used to control the degradation rate of the Mg alloy and promote a local antibacterial activity. ZnO NPs were dispersed at 5 ... Read more