ahmedabudief

Prof. Ahmed Mohamed Abu-Dief

Professor - Professor of Physical and Inorganic Chemistry

Faculty of science

Address: Behind hospital of Sohag University - Ali Ebn Abi Taleb Street

349

Like

PRINCIPLES IN CORROSION

2023-04-04 02:21:46 |

This course includes corrosion definition and its cost. Electrochemical nature and types of corrosion. Corrosion rate measurements. Pourbaix diagram of metals. Localized Corrosion.  Corrosion Environment and corrosion protection


2023-04-04 02:27:52 | PRINCIPLES IN CORROSION
Choose the best answer
1- What conditions are required for rusting to take place in an eques solution? a) Water only b) Oxygen only c) Water and oxygen d) Water and carbon dioxide 2-Corrosion occurs because the metal need to returns to their: a) metastable compounds b) unstable compounds c) ... Read more

2023-04-04 02:29:07 | PRINCIPLES IN CORROSION
Calculate
1- Calculate the exact half cell potential of Nickel (Eo= -0.25) in a 0.01 M NiSO4 solution.... Read more

2023-04-04 02:30:26 | PRINCIPLES IN CORROSION
Calculate 1
Calculate the theoretical tendency of NICKEL (Eo= -0.25) to corrode in water of pH=7.Assume corrosion products are H2 and Ni(OH)2 the solubility product of which is 1.8×10-15.... Read more

2023-04-04 02:32:47 | PRINCIPLES IN CORROSION
Problem
Cu metal (E = 0.34V) was immersed in acidic solution of pH=4, determine the theoretical tendency for Cu corrosion in this media.... Read more

2023-04-04 02:34:32 | PRINCIPLES IN CORROSION
Which one of the following statements is correct
a) In cathodic protection, corrosion of a metal is minimised by forming a contact to another metal with a higher reduction potential. b) In anodic inhibition, corrosion of a metal is minimised by forming a porous barrier at its surface. c) Iron corrodes more rapidly in salty water becau... Read more

2023-04-04 02:35:37 | PRINCIPLES IN CORROSION
effect of temperature
What is effect of temperature on Zinc corrosion in fresh water?... Read more

2023-04-04 02:37:07 | PRINCIPLES IN CORROSION
Problem2
1- The emf a cell made of ZINC(-0.76V) (anode) and hydrogen electrode (cathode) immersed in 0.3 M ZnCl2 is +0.590V. What is the pH of the solution?... Read more

2023-04-04 02:38:10 | PRINCIPLES IN CORROSION
Problem3
A solution is made up to contain 0.01 M NaOH. What is the theoretical tendency of PB+2PB+2(-0.126V) to corrode in this pH?... Read more

2023-04-05 01:16:36 | PRINCIPLES IN CORROSION
Choose the correct answer 1
* Which of the following products are obtained when a zinc metal is dipped in dilute HCl solution? a) H2, ZnCl2 b) Cl2, ZnH2 c) H2, Cl2 and ZnH2 d) Zn, H2 and Cl2 * 2. Which of the following reactions occurs when iron is immersed in (oxygenated) sea water? a) Fe==>Fe+2+2e, 2H++2e==>H2 b) Fe==>Fe+2+2... Read more

2023-04-08 00:58:09 | PRINCIPLES IN CORROSION
Corrosion rate
1. Iron sample (At.wt=56g) with dimensions (10mm x 20mm x 2mm) and density =7.87g/cm3, is exposed to a corrosive environment (neglect thickness for surface area). Just one sides of the sample are exposed to corrosive environment with corrosion current about(icorr) 1.12×1... Read more

2023-04-08 00:59:43 | PRINCIPLES IN CORROSION
proplem 4
Iron sample (At.wt=56g) with dimensions (10mm x 20mm x 2mm) and density =7.87g/cm3, is exposed to a corrosive environment (neglect thickness for surface area). Just one sides of the sample are exposed to corrosive environment with corrosion current about(icorr) 1.12×10-3 A/c... Read more

2023-04-08 01:08:00 | PRINCIPLES IN CORROSION
proplem5
1. A sheet of carbon steel ONE meter wide by THREE meter long has lost 40 g with a current density of 1.69 X 10-41.69 X 10-4A/cm2 over the past SIX MONTHS. Suppose that only one face of the metal is exposed to corrosive media. Determine the corrosion rate in: (a) mmpy (Mil... Read more

2023-04-08 01:30:56 | PRINCIPLES IN CORROSION
Choose
* What is Corrosion? a) Destruction or deterioration of a material b) Conversion of metal atoms to metallic ions c) Conversion of metal ions to metal atoms d) Destruction of materials involving in the conversion of metal atoms into metal ions * The chemical formula of rust is ______ a) Fe1O b) Fe2O3... Read more

2023-04-08 02:09:25 | PRINCIPLES IN CORROSION
Choose2
1. Which of the following factors affect the corrosion rate of metal? a) Relative surface area of an anode and cathode b) Nature of the oxide layer c) Purity of metal d) Relative surface area of an anode and cathode, nature of oxide layer and purity of metal 2. The cathodic reaction that occurs dur... Read more