Electrical prospecting methods in geophysics are concerned by measuring the earth`s response (mainly potential) produced by electric current flow in the ground.

Electrical Potentials: Artificial , Natural

Artificial:

1-Resistivity method:

2- Induced Polarization (overvoltage) :

Natural:

1- Self Potential (SP):

2- Telluric Method:

Electrical Resistivity Method

Applications of Resistivity Method

Electrical resistivity technique can be applied to a wide variety of problems encountered in environmental, groundwater, geotechnical and archaeological studies.

Advantages of Resistivity Method

  • Can be used for both vertical sounding and lateral profiling.
  • Good vertical resolution.
  • Measurements can be made to depths of few hundred feet or more.
  • Various electrode configurations are available for different applications.

Limitations of Resistivity Measurements

  • Electrodes must be in direct contact with soil; if concrete or asphalt is present, holes must be drilled for inserting the electrodes and then refilled when the survey is complete.
  • For deep investigations, electrode arrays can be quite long. The distance between outside electrodes must be 4 to 5 times the depth of investigation.
  • Measurements may be limited by either highly conductive or highly resistive surface soils. If shallow clays and extremely shallow groundwater are present, most of the current may concentrate at the surface. On the other side, the presence of thick, dry, gravelly material (or massive dry material) at the surface may prevent the current from entering the ground.

 

 

كتب مقترحة

- Dobrin (1976) Introduction to Geophysical Prospecting. 3rd edn: McGraw-Hill Book Co

- Kearey P, Brooks M and Hill I (2002): An introduction to Geophysical exploration. Blackwell Science. Third edition

- Exploration Seismology Shreif and Geldert,1995

- Hill I. , Brooks M. and Keary P. (2002) an introduction to geophysical Exploration                            

- Journal of geophysics

- Journal of Tectonophysics

                                                      اسم المقرر:جيوفيزياء I

أهداف المقرر:

 اكساب الطلاب المهارات المتخصصة للطرق الجيوفيزيقية المختلفة المستخدمة في عمليات التنقيب عن الثروات المعدنية المختلفة وكذلك الربط بين  محتويات المقرر والتنمية البيئية المستدامة.

محتوى المقرر:

  المقدمة - الإلمام بالمفاهيم الأساسية لعلم الجيوفيزياء – الطريقة السيزمية الانكسارية – ثوابت المرونة – الموجات السيزمية – طريقة الانعكاسية السيزمية – الطريقة الكهربية – طريقة الجهد الذاتى – ترتيب الالكترودات – طريقة المقاومة- الطرق الكهرومغناطيسية - أجهزة طرق التنقيب الجيوفيزيائي.

الطريقة التثاقلية – طريقة المغناطيسية – الشذوذ التحتسطحى للتراكيب الجيولوجية و طرق تحليلها في الطريقتين

تحديد الأنجاهات التركيبية التحت سطحية واماكن تجمعات البترول للأعماق البعيدة والقريبة من سطح الأرض